MAZDA MX-6 — Özellikler ve VIN Sorgulama
MAZDA MX-6 için ayrıntılı özellikleri bulun. Motor, gövde ve güvenlik ayrıntılarını görmek için herhangi bir MAZDA MX-6 VIN'ini çözün.
MAZDA MX-6 için ayrıntılı özellikleri bulun. Motor, gövde ve güvenlik ayrıntılarını görmek için herhangi bir MAZDA MX-6 VIN'ini çözün.
The Mazda MX-6 is a front-engine, front-wheel-drive coupé manufactured and marketed by Mazda from 1987 to 1997 across two generations.
The Mazda MX-6 is a front-engine, front-wheel-drive coupé manufactured and marketed by Mazda from 1987 to 1997 across two generations. Mechanically identical to the Ford Probe, the Capella/626 and its hatchback platform mate, the Ford Telstar, these cars shared the GD (1988–1992) and GE (1993–1997) platforms. The MX-6 replaced the 626 Coupé, although it continued to share the same chassis. The MX-6, 626, and Ford Probe were manufactured at joint-venture plants either by AutoAlliance in Flat Rock, Michigan, for the North American market, or in Japan for Asian and European markets.
The first-generation MX-6 appeared in 1987 and lasted until 1992 in the United States. In some markets, the model years were from 1987 to 1991. It was based on a series of futuristic sports compact concept cars of the early 1980s. It was a large coupé, based on the Mazda GD platform, and was powered by the inline-four Mazda F engines. It used the Mazda G4A-EL four-speed electronic-shift automatic transmission. The US market made use of the F2 2.2-liter engine, with the base engine producing 110 hp (82 kW). The turbocharged option produces 145 hp (108 kW). European and Japanese market versions were shipped with either the 1.8 L F8 or the 2.0 L FE or FE-DOHC DOHC engines. The MX-6 was produced with two transmission options, a five-speed manual transmission or a four-speed automatic with overdrive. This generation was available in several trim levels, which differed depending on the market in which the vehicle was sold. In the United States, the MX-6 was available in DX, LX, LE, and GT trim levels:
DX was the "bare bones" model, offering the base 110 hp (82 kW) and 130 lb⋅ft (176 N⋅m) F2 2.2 L engine and few options, but most MX-6s sold in the US were equipped with air conditioning. LX added power windows, power locks, and power mirrors, as well as an optional electric moonroof. LE was a rare "Luxury or Leather Edition" model that was the same as the LX, but included leather seating surfaces and a leather-wrapped shift knob on manual transmission-equipped vehicles. GT included all options from the LX, but also stepped up to the F2T 2.2 L turbocharged, intercooled engine, which put out 145 hp (108 kW) and 190 lb⋅ft (258 N⋅m) of torque delivering a significant performance boost. It also had four-wheel disc brakes with ABS as optional, and three-way electronically adjustable suspension, dubbed AAS. In 1989, Mazda offered a special four-wheel steering (commonly abbreviated 4WS) option on MX-6 GTs destined for the U.S. This system consisted of an electronically controlled rear steering rack that turned the rear wheels opposite to the fronts at low speeds to improve cornering, and turned the rear wheels with the fronts at high speeds to improve highway lane change maneuvering. This option was available through all years for GT models in other markets. European specification vehicles shipped as the 626 Coupé and commonly received either the 1.8 L SOHC F8 or 2.0 L SOHC FE engine in GLX models, or the 2.0 L FE-DOHC engine in their GT models. 4WS was a common option for European 626 Coupés. Australian vehicles were almost always equipped with the 2.2 L turbocharged F2T engine as the US models, as well as 4WS. They also carried the MX-6 name of the American models. Japanese specification vehicles were shipped as the Capella C2 and were available in several trims, most notably GT-R (FE-DOHC and 4WS), GT-X (FE-DOHC and AAS), or GT-S (F8 and 4WS or AAS). In other parts of East Asia, the MX-6 name was also used. New Zealand received vehicles in either European or Australian specification, selectable on order. As such, New Zealand-market GTs can have either the F2T 2.2 L turbocharged engine or the FE-DOHC 2.0 L DOHC, with optional 4WS.
Mazda launched the second generation MX-6 using the GE platform, shared by the 626 and Ford rebadged cars, the Ford Probe and the Ford Telstar. It was released in three distinct variants worldwide, known as A-spec, E-spec, and J-spec, which relates to their destined markets – U.S., Europe, and Japan, respectively.
A-spec The A-spec variant for the North American market was manufactured alongside the Ford Probe and Mazda 626 from 1992 as a 1993 model by AutoAlliance International in Flat Rock, Michigan. Three trim levels were available on the A-spec models:
Kaynak: Vikipedi · CC BY-SA