SAAB 900 — specificații și căutare VIN
Găsește specificații detaliate pentru SAAB 900. Decodează orice VIN SAAB 900 pentru a vedea motorul, caroseria și siguranța.
Găsește specificații detaliate pentru SAAB 900. Decodează orice VIN SAAB 900 pentru a vedea motorul, caroseria și siguranța.
The Saab 900 is a mid-sized automobile produced by Swedish manufacturer Saab from 1978 until 1998 in two generations: the first from 1978 to 1994, and the second from 1994 to 1998.
The Saab 900 is a mid-sized automobile produced by Swedish manufacturer Saab from 1978 until 1998 in two generations: the first from 1978 to 1994, and the second from 1994 to 1998. The first-generation car was based on the Saab 99 chassis, though with a longer front end to meet U.S. frontal crash regulations and to make room for the turbo-charged engines, air conditioning and other equipment that was not available in the early days of the 99 model. The 900 was produced in 2- and 4-door sedan, and 3- and 5-door hatchback configurations and, from 1986, as a cabriolet (convertible) model. There were single- and twin-Zenith carburettor; fuel injected, and turbocharged engines, including Full Pressure Turbo (FPT) and, in European models during the early 1990s, Low Pressure Turbos (LPT).
The 900 was originally introduced on 12 May 1978, for the 1979 model year. Sales commenced in the fall of 1978. It has a longitudinally mounted, 45-degree canted, inline four-cylinder engine, double wishbone front suspension and beam-axle rear suspension. Like its predecessor, the 900 contained a number of unusual design features that distinguish it from most other cars. First, the B-engine, that was installed "backwards", with power delivered from the crank at the front of the car. Second, the transmission, technically a transaxle, bolted directly to the bottom of the engine to form the oil pan (albeit with separate oil lubrication). Thus, power from the crank would be delivered out of the engine at the front, then transferred down and back to the transmission below, via a set of chain-driven primary gears. The body was developed from the older 99 model, keeping the basic layout but with a new longer front-end. This allowed for more space in the engine bay and better crash protection for passengers. The middle and rear parts of the body were identical to those of the 99 Combi Coupé (which was withdrawn from the lineup at the same time). Later a new rear end was designed for the 2-door and 4-door sedans. In the early 1980s, most 900s were produced in Trollhättan. However, coinciding with the introduction of the 9000, most of the 900's production took place elsewhere. The Valmet plant in Finland also produced the base models of the 900, a total of 238,898 examples. The plant in Arlöv (now closed), near Malmö, also produced the car. Refined over several decades of two-digit Saab models, the 900's double wishbone suspension design provided excellent handling and road feel. The rear suspension comprised a typical beam axle design, stabilized with a Panhard rod. However, the attachment points between the axle and chassis made up an unusual configuration that, in essence, consists of two Watt's linkages at either end of the axle: A lower control arm attaches the axle to the bottom of the vehicle, while an upper link attaches at the top but faces towards the rear, unlike a typical four-link design with both lower and upper links facing forward. The design-principle being similar with the rear suspension presented in Alfa Romeo Alfasud already in 1971, except in the Alfasud, the beam axle itself functioned as a sway-bar, hence separate sway-bars in the rear suspension were not needed.
Sursă: Wikipedia · CC BY-SA